Compatible for SX100.1 (with Windows10).
The SX100 Tool for TC 6 is meant for service engineers that are responsible for the set-up,
maintenance and troubleshooting of the SX100 in combination with Top Control version 184.108.40.206 or higher.
The useful tool bundles a lot of tasks that can be done without the tool, but would require much 'clicking around' in the Windows system, that is:
- Checking the status of the SX100 and the communication connections;
2. Switching relevant Windows Services on and off and stopping and starting relevant Top Control applications to enable project and program updates;
3. Rebooting the SX100;
4. Control Remote Desktop sessions;
5. Showing notes left by other service engineers and adding notes;
6. Showing logs on the status of the SX100 and the actions executed with the tool;
1. Solved problem with request of WAN IP Address.
2. Remove TCEnergy option from user interface.
3. Seconds calculation (x1000) was not correct in Status LogBook.
4. Add extra status logbook information if External IP doesn’t work.
1. Problems with auto logon for the sx100.1 has been solved in this version.
1. No official release.
1. Top Control application boot sequence in the start-up folder adjusted.
1. In this version is the CPU and Memory performance counter removed. Some SX100 or SX100.1 has a problem. Some SX100 and SX100.1 had problems presenting this performance counter.To avoid all risks, it has been deleted.
1. In the tab “Overview” TCWebVsion check didn’t work on a SX100.1. In this version is this problem solved.
1. Only for SX100.1 – Shortcut for messenger service and TCWebvision is switched off..
1. Small bugfix.
1. Compatible for SX100.1 (with Windows10).
2. Small bugfix.
1. New feature for project software install on the SX100.
2. Small bugfix.
1. End of Update button (Project Update) doesn’t start the Priva applications with the right parameters. In this version is this issue solved.
2. Change WAN IP Address mechanism. When click on the Internet icon in tab “Overview” you’re able to adjust the interval check. In the previous version was the interval check 2 minutes fix.
3. Small user interface changes.
1. Add more information in Status LogBook.
2. Small exception bugfixes.
1. Exception error with “Prepare for project update” button is solved in this version.
2. Small user interface changes.
Version 220.127.116.11 - Official released.
1. Add Status Logbook.
1. Changed Prerequisites process.
1. Field-test version.