version 1.2.2.0
Compatible for SX100.1 (with Windows 10).
The SX100 Tool for TC8 is meant for service engineers that are responsible for the set-up,
maintenance and troubleshooting of the SX100 in combination with Top Control version 8.5.12.3 or higher.
The useful tool bundles a lot of tasks that can be done without the tool, but would require much 'clicking around' in the Windows system, that is:
- Checking the status of the SX100 and the communication connections;
2. Switching relevant Windows Services on and off and stopping and starting relevant Top Control applications to enable project and program updates;
3. Rebooting the SX100;
4. Control Remote Desktop sessions;
5. Showing notes left by other service engineers and adding notes;
6. Showing logs on the status of the SX100 and the actions executed with the tool;
RDN 31-12-2021:
Version 1.2.2.0
1. Solved problem with request of WAN IP Address.
RDN 10-06-2020:
Version 1.2.1.1
1. Bug fix in combination with Sending Email TC8.
RDN 22-05-2020:
Version 1.2.1.0
1. Compatible with Top Control version 8.7.x.x.
RDN 20-08-2019:
Version 1.2.0.5
1. Top Control application boot sequence in the start-up folder adjusted.
RDN 14-08-2019:
Version 1.2.0.4
1. In this version is the CPU and Memory performance counter removed. Some SX100 or SX100.1 has a problem. Some SX100 and SX100.1 had problems presenting this performance counter. To avoid all risks, it has been deleted.
RDN 14-08-2019:
Version 1.2.0.3
1. No official release.
RDN 22-02-2019:
Version 1.2.0.2
1. Small bugfix.
RDN 28-12-2018:
Version 1.2.0.1
1. Small bugfix.
RDN 28-11-2018:
Version 1.2.0.0
1. Compatible for SX100.1 (with Windows 10).
2. Small bugfix.
RDN 23-07-2018:
Version 1.1.0.2
1. When BlueID controller was not reachable the application crashed. In this version is this problem solved.
RDN 27-06-2018:
Version 1.1.0.1
1. Wrong application description in about box.
RDN 19-06-2018:
Version 1.1.0.0
1. Offical released.
RDN 01-06-2018:
Version 1.0.0.0
1. Field-test version.